ZELNA

Installation Manual

ZELNA STRAIGHT BAR LED LAMP

1. Attach the cables to the beam or ceiling. Hang the ballast.
2. Plug (or unplug, if replacing) the LED bars onto the ballast.
3. Connect the dimmer cables between lamps. Connect the power cord to each lamp
4. All done!

ZELNA FOLDED BAR LED LAMP

1. Attach the cables to the beam or ceiling. Hang the lamp frame as indicated.
2. Connect the light and the driver, and plug to the power source.
Veuillez remplir le formulaire ci-dessous
Por favor complete el siguiente formulario
Please complete the following form

• Points visible through BACnet®
• Wireless control of end-devices
• Supports up to 30 connected controllers per gateway
• Third-party interoperability through your preferred BACnet® IP system

VOLTAGE
TYPICAL
CONSUMPTION

24 VAC ± 15%; 50/60 HZ | 24 VDC ± 10%.
5 VA + output (VAC); 1.6 W + output (VDC)

PIKON’s compact design and Fast-Wire-connector-on-fixed-steelcable installation make it particularly well-suited to deliver ideal
light levels for birds in oor farm operations with lower height
ceilings that do not require lamp cable extensions**.

TECHNOLOGY
POWER
VOLTAGE
LUMENS
EFFICACY
CRI
CCT

LED
9 W
48 VDC
1000
111.11 lm./W
> 85 Ra.
3000 Kelvin*

With its extended length and light weight, the SONI pendant luminaire is an excellent option for floor farm operations with high ceilings, delivering illumination most appropriate for birds on the lower section of the space.

TECHNOLOGY
POWER
VOLTAGE
LUMENS
EFFICACY

LED
9 W
48 VDC
1000 delivered
111.11 lm./W