AMTEK Self-Powered
Wireless Controls

CONTROLLERS

AMTEK Controllers are engineered to receive radio transmissions from AMTEK self-powered
wireless light switches and sensors.

Control virtually anything that turns on and of by simply wiring an AMTEK Wireless Controller between the power source and the device. Our controllers are typically used to control lights, lamps, fans, blinds, HVAC systems and security systems.

ENERGY SAVINGS

Businesses can reduce annual
energy costs by 25% with
updated controls.

FAST INSTALLATION

Avoid disrupting business
operations by installing our
controls quickly during off
hours.

UNIQUE APPLICATIONS

Our wireless controls can be
installed in places where wired
controls cannot, creating new
opportunities for saving.

ENERGY HARVESTING

Solar-power and motion sensors are designed to save energy by turning down lights automatically

SELF-POWERED & WIRELESS

Our wireless switches and sensors are powered by kinetic and solar energy and do not require wiring.

ENERGY CODE COMPLIANCE

Our products comply with current government and industry energy codes DLC, California Title 24 and ASHRAE 90.1.

EASY CONFIGURATION

Android & iOS apps available
for adjusting your lighting
configuration.

WIRELESS IoT

AMTEK provides wireless solutions for EnOcean, ZigBee, and Bluetooth-powered IoT systems.

BUILDING MANAGEMENT
SYSTEM INTEGRATION

Easy integration with your building management system using BACnet protocol.

The e AMTEK 5A 0-10V Fixture Controller allows wireless control of room ambiance by dimming LED and fluorescent lights. The controller reduces energy consumption through the use of manual control, vacancy detection, daylighting, as well as load shedding strategies enabled with wireless connections to accessories such as wireless motion sensors, light sensors, switches, etc. Our controller provides a compelling, cost-eective, minimally-disruptive solution for compliance with the latest energy regulations.

AREA VS. FIXTURE CONTROLLER: The 5A Fixture Controller on this page is optimized for use one per fixture to eliminate the need for adding control wiring between fixtures.

5A 0-10V WIRELESS
DIMMING FIXTURE CONTROLLER

APPLICATIONS

• Conference Rooms
• Offices
• Class Rooms
• Daylight harvesting
• Load shedding

SUPPLY VOLTAGE

MAX. LOAD


COMPATIBLE LOADS

RANGE

RF COMMUNICATIONS

DIMENSIONS

OPERATING TEMP.

STORAGE TEMP.

CERTIFICATIONS

902 MHZ

AMI-WEDAC5

100-277 VAC 50 /60 Hz

5 AMPs all loads; 0-10V sink 100mA; 0-10V source 1mA
70A Max Inrush Current

Metal Halide; Sodium Vapour; LED; Induction; Fluorescent

50-150 feet

902 MHz EnOcean

2.11 x 1.73 x 1.09 inches (54 x 44 x 28 mm)

+32° to +122°F (0° to +50°C)

-4° to +176°F (-20° to +80°C)

UL 60730 (safety); UL 2043 (plenum); CSA c22.2#14-05 (safety); CE – IEC 60730; FCC: SZV-STM300U IC: 5713A-STM300U

Veuillez remplir le formulaire ci-dessous
Por favor complete el siguiente formulario
Please complete the following form

• Points visible through BACnet®
• Wireless control of end-devices
• Supports up to 30 connected controllers per gateway
• Third-party interoperability through your preferred BACnet® IP system

VOLTAGE
TYPICAL
CONSUMPTION

24 VAC ± 15%; 50/60 HZ | 24 VDC ± 10%.
5 VA + output (VAC); 1.6 W + output (VDC)

PIKON’s compact design and Fast-Wire-connector-on-fixed-steelcable installation make it particularly well-suited to deliver ideal
light levels for birds in oor farm operations with lower height
ceilings that do not require lamp cable extensions**.

TECHNOLOGY
POWER
VOLTAGE
LUMENS
EFFICACY
CRI
CCT

LED
9 W
48 VDC
1000
111.11 lm./W
> 85 Ra.
3000 Kelvin*

With its extended length and light weight, the SONI pendant luminaire is an excellent option for floor farm operations with high ceilings, delivering illumination most appropriate for birds on the lower section of the space.

TECHNOLOGY
POWER
VOLTAGE
LUMENS
EFFICACY

LED
9 W
48 VDC
1000 delivered
111.11 lm./W