AMTEK Self-Powered
Wireless Controls

SENSORS

AMTEK Self-Powered Wireless Sensors
are powered by a small solar panel that eliminates the need for wires or batteries. They communicate with AMTEK controllers to control virtually any on/oFF device and can be used for temperature control, motion sensing, and more.

ENERGY SAVINGS

Businesses can reduce annual
energy costs by 25% with
updated controls.

FAST INSTALLATION

Avoid disrupting business
operations by installing our
controls quickly during off
hours.

UNIQUE APPLICATIONS

Our wireless controls can be
installed in places where wired
controls cannot, creating new
opportunities for saving.

ENERGY HARVESTING

Solar-power and motion sensors are designed to save energy by turning down lights automatically

SELF-POWERED & WIRELESS

Our wireless switches and sensors are powered by kinetic and solar energy and do not require wiring.

ENERGY CODE COMPLIANCE

Our products comply with current government and industry energy codes DLC, California Title 24 and ASHRAE 90.1.

EASY CONFIGURATION

Android & iOS apps available
for adjusting your lighting
configuration.

WIRELESS IoT

AMTEK provides wireless solutions for EnOcean, ZigBee, and Bluetooth-powered IoT systems.

BUILDING MANAGEMENT SYSTEM INTEGRATION

Easy integration with your building management system using BACnet protocol.

The e AMTEK High-Ceiling/Wall-Mounted Self-Powered Wireless Occupancy Sensor allows fine-tuned control of lights, temperature, and other loads by signaling when a space has been unoccupied for a set period of time. Because the sensor is wireless, there is no need to run additional wiring. Installation can be completed in a matter of minutes. The sensor is self-powered by harvesting energy from ambient light.

HIGH-CEILING/WALL-MOUNTED SELF-POWERED WIRELESS OCCUPANCY SENSOR

902 MHZ

AMI-WECOS

POWER SUPPLY (Optional)



FREQUENCY

TRANS. RANGE

MOTION DETECTION RANGE

START UP CHARGE TIME

FROM EMPTY

CHARGE TIME TO FULL

SUSTAINING CHARGE TIME

MOTION TRANS. INTERVAL

UNOCCUPIED TRANS.

HEARTBEAT TRANS.

OPERATING LIFE IN DARKNESS

OPTIONAL BATTERY LIFE




ENOCEAN EQUIPMENT PROFILE

DIMENSIONS

MOUNTING HEIGHT

AGENCY COMPLIANCE

Indoor light energy harvesting (default); Supplemental battery (CR2032) or 2-wire connector for external power or remote solar cell (3-5VDC)

902 MHz EnOcean RF transmitter

160 ft. (50 m.)

60 ft. (18 m.) diameter @ 33 ft. (10 m.) mounting height

First Motion Transmission/Linking = 5 min. @ 200 lux;

Motion LED Blink Light/Walk Test = 1.5 hours @ 2000 lux

25 hrs. @200 lux

3 hours per 24 hours @ 200 lux

2 minutes

10 and 30 minutes since last motion detection

Default = disable / enable = 1 hr intervals

80 hours (after full charge)

Continuous battery-free operation standard; Infrequent Bright Light: 20 yrs. (with 200 lux for 2 hrs./day, 7 days/wk.) Consistent Low Light: 15 yrs. (with 65 lux for 5 hrs./day 7 days/wk.) Total Darkness: 6.5 yrs.

A5-07-01

6.5" H x 2.36" W x 1.47" D (160 mm. x 60 mm. x 37 mm.)

15-40 feet (5-12.2 m.) recommended

FCC, IC, RoHS, CE, R&TTE

Veuillez remplir le formulaire ci-dessous
Por favor complete el siguiente formulario
Please complete the following form