AMTEK Self-Powered
Wireless Controls

SENSORS

AMTEK Self-Powered Wireless Sensors
are powered by a small solar panel that eliminates the need for wires or batteries. They communicate with AMTEK controllers to control virtually any on/oFF device and can be used for temperature control, motion sensing, and more.

ENERGY SAVINGS

Businesses can reduce annual
energy costs by 25% with
updated controls.

FAST INSTALLATION

Avoid disrupting business
operations by installing our
controls quickly during off
hours.

UNIQUE APPLICATIONS

Our wireless controls can be
installed in places where wired
controls cannot, creating new
opportunities for saving.

ENERGY HARVESTING

Solar-power and motion sensors are designed to save energy by turning down lights automatically

SELF-POWERED & WIRELESS

Our wireless switches and sensors are powered by kinetic and solar energy and do not require wiring.

ENERGY CODE COMPLIANCE

Our products comply with current government and industry energy codes DLC, California Title 24 and ASHRAE 90.1.

EASY CONFIGURATION

Android & iOS apps available
for adjusting your lighting
configuration.

WIRELESS IoT

AMTEK provides wireless solutions for EnOcean, ZigBee, and Bluetooth-powered IoT systems.

BUILDING MANAGEMENT SYSTEM INTEGRATION

Easy integration with your building management system using BACnet protocol.

The AMTEK Dimming Wireless Fixture-Mounted High-Bay PIR Sensorsaves time, energy, and money by avoiding the costly and time-consuming installation of hardwired daylighting controls. It saves energy by lowering the output of artificial light when daylight is present in a room, saving up to 60% of the energy. It also works in conjunction with wireless relays, dimmers, room and task on/off controllers and can integrate into systems using BACnet, RS-232, and Ethernet gateways. The sensor can be used in open-loop and closed-loop daylight-harvesting applications. It is RoHS compliant, so it can help buildings qualify for LEED credits and comply with International Green Construction Code Standard 189.1.

SELF-POWERED WIRELESS LIGHT SENSOR

902 MHZ

AMI-WELS

POWER SUPPLY

MEASUREMENT RANGE

TYPICAL ACCURACY

MEASUREMENT INTERVAL

TRANS. INTERVAL


RF STANDARD

TRANSMISSION RANGE

DIMENSIONS

WEIGHT

MOUNTING POSITION

ENVIRONMENT


AGENCY COMPLIANCE

Solar energy harvesting

0 … 1020 lux / 4 lux

+-5 % at full scale / 68°F

1 minute

Immediate if change > 50 lux versus last transmission; Heartbeat every 20 … 30 minutes (affected at random)

EnOcean 902 MHz

80 ft. (25 m.)

6.30” L x 2.36” W x 1.15” D (160 mm. x 60 mm. x 37 mm.)

4.4 oz. (125 g)

At the ceiling–close to ambient light source (window)

Indoor use only / 32° to 140° F (0° to 60° C) 20% to 85% relative humidity (non condensing)

FCC; IC; RoHS

Veuillez remplir le formulaire ci-dessous
Por favor complete el siguiente formulario
Please complete the following form