AMTEK Self-Powered
Wireless Controls

SENSORS

AMTEK Self-Powered Wireless Sensors
are powered by a small solar panel that eliminates the need for wires or batteries. They communicate with AMTEK controllers to control virtually any on/oFF device and can be used for temperature control, motion sensing, and more.

ENERGY SAVINGS

Businesses can reduce annual
energy costs by 25% with
updated controls.

FAST INSTALLATION

Avoid disrupting business
operations by installing our
controls quickly during off
hours.

UNIQUE APPLICATIONS

Our wireless controls can be
installed in places where wired
controls cannot, creating new
opportunities for saving.

ENERGY HARVESTING

Solar-power and motion sensors are designed to save energy by turning down lights automatically

SELF-POWERED & WIRELESS

Our wireless switches and sensors are powered by kinetic and solar energy and do not require wiring.

ENERGY CODE COMPLIANCE

Our products comply with current government and industry energy codes DLC, California Title 24 and ASHRAE 90.1.

EASY CONFIGURATION

Android & iOS apps available
for adjusting your lighting
configuration.

WIRELESS IoT

AMTEK provides wireless solutions for EnOcean, ZigBee, and Bluetooth-powered IoT systems.

BUILDING MANAGEMENT SYSTEM INTEGRATION

Easy integration with your building management system using BACnet protocol.

CEILING/WALL-MOUNTED SELF-POWERED WIRELESS OCCUPANCY SENSOR

The A AMTEK Wall-MountedOccupancy Sensor overs entire rooms or walkways
with its excellent motiondetection performance.

902 MHZ

AMI-WECOS

FREQUENCY

TRANS. RANGE

MOTION DETECTION RANGE

MIN. OPERATION LIGHT

START UP CHARGE TIME FROM EMPTY


CHARGE TIME TO FULL

SUSTAINING CHARGE TIME

MOTION TRANS. INTERVAL

UNOCCUPIED TRANS.

HEARTBEAT TRANS.

OPERATING LIFE IN DARKNESS

OPTIONAL BATTERY LIFE




ENOCEAN EQUIPMENT PROFILE

DIMENSIONS

MOUNTING HEIGHT

AGENCY COMPLIANCE

902 MHz EnOcean protocol

50-100 ft. (17-33 m.)

50 ft. (15 m.) diameter

50 lux (for auto-off only)

First motion transmission / linking = 5 min. @ 200 lux; motion LED blink; Light/Walk Test Modes = 1.5 hrs. @ 2000 lux.


25 hrs. @ 200 lux

3 hours per 24 hours @ 200 lux

2 minutes

10 and 30 minutes since last motion detection

Default = disable / enable = 1 hr. intervals

80 hours (after full charge)

Continuous battery-free operation standard; Infrequent Bright Light: 20 yrs. (w/ 200 lux for 2 hrs./day, 7 days/wk.) Consistent Low Light: 15 yrs. (w/ 65 lux for 5 hrs./day 7 days/wk.) Total Darkness: 6.5 yrs.

A5-07-01

6.5" H x 2.36" W x 1.47" D (160 mm. x 60 mm. x 37 mm.)

7-10 feet (2-3 m.) recommended

902 Mhz Contains FCC: SZV-STM300U; 868 MHz: CE Certified; R&TTE conform; 315 MHz: Contains FCC: SZV-EOSC01 IC: 5713A-EOSC01; 928 MHz: Module inside conforms to ARIB STD-T108

Veuillez remplir le formulaire ci-dessous
Por favor complete el siguiente formulario
Please complete the following form

• Points visible through BACnet®
• Wireless control of end-devices
• Supports up to 30 connected controllers per gateway
• Third-party interoperability through your preferred BACnet® IP system

VOLTAGE
TYPICAL
CONSUMPTION

24 VAC ± 15%; 50/60 HZ | 24 VDC ± 10%.
5 VA + output (VAC); 1.6 W + output (VDC)

PIKON’s compact design and Fast-Wire-connector-on-fixed-steelcable installation make it particularly well-suited to deliver ideal
light levels for birds in oor farm operations with lower height
ceilings that do not require lamp cable extensions**.

TECHNOLOGY
POWER
VOLTAGE
LUMENS
EFFICACY
CRI
CCT

LED
9 W
48 VDC
1000
111.11 lm./W
> 85 Ra.
3000 Kelvin*

With its extended length and light weight, the SONI pendant luminaire is an excellent option for floor farm operations with high ceilings, delivering illumination most appropriate for birds on the lower section of the space.

TECHNOLOGY
POWER
VOLTAGE
LUMENS
EFFICACY

LED
9 W
48 VDC
1000 delivered
111.11 lm./W